The Utilization of IoT in Real-time Temperature and Humidity Monitoring Using Microcontroller: A Literature Review
Main Article Content
Abstract
Temperature and humidity must be considered in various fields such as weather, agriculture, technology and industry. The Internet of Things (IoT) can be applied in temperature and humidity monitoring systems so that the data obtained is real time. The research uses a literature review method that has the main goal of searching journals through Google Scholar. This study analyzes the use of IoT for temperature and humidity monitoring using various sensors such as DHT22, DHT11, and DS18B20 in various fields. Based on several journals from 2017 to 2024, it was selected to provide an understanding of the effectiveness and accuracy of different types of sensors in environmental monitoring. The results of the study show that IOT makes it easier to monitor environmental conditions efficiently and accurately, helping to make decisions quickly and automatically. The DHT22 sensor is effective for monitoring due to its low cost and good quality, while DS18B20 excels in accuracy. This research is useful in the development of IoT in various environmental monitoring needs.
Downloads
References
D. Srivastava, A. Kesarwani, dan S. Dubey, “Measurement of Temperature and Humidity by using Arduino Tool and DHT11,” Int. Res. J. Eng. Technol., vol. 05, no. 12, hal. 876–878, 2018, [Daring]. Tersedia pada: www.irjet.net.
R. A. Rahman, U. R. Hashim, dan S. Ahmad, “IoT based temperature and humidity monitoring framework,” Bull. Electr. Eng. Informatics, 2020, doi: 10.11591/eei.v9i1.1557.
Y. A. Ahmad, T. Surya Gunawan, H. Mansor, B. A. Hamida, A. Fikri Hishamudin, dan F. Arifin, “On the Evaluation of DHT22 Temperature Sensor for IoT Application,” 2021, doi: 10.1109/ICCCE50029.2021.9467147.
M. Sanderson, K. Arbuthnott, S. Kovats, S. Hajat, dan P. Falloon, The use of climate information to estimate future mortality from high ambient temperature: A systematic literature review, vol. 12, no. 7. 2017.
L. Barik, “IoT based temperature and humidity controlling using Arduino and Raspberry Pi,” Int. J. Adv. Comput. Sci. Appl., vol. 10, no. 9, hal. 494–502, 2019, doi: 10.14569/ijacsa.2019.0100966.
F. Puspasari, I. Fahrurrozi, U. Y. Oktiawati, dan T. P. Satya, “Development of embedded system in monitoring temperature and humidity as supporting smart farm,” J. Phys. Conf. Ser., vol. 1511, no. 1, 2020, doi: 10.1088/1742-6596/1511/1/012017.
T. H. Nasution, M. Yasir, Fahmi, dan Soeharwinto, “Designing an IoT system for monitoring and controlling temperature and humidity in mushroom cultivation fields,” ICECOS 2019 - 3rd Int. Conf. Electr. Eng. Comput. Sci. Proceeding, hal. 326–331, 2019, doi: 10.1109/ICECOS47637.2019.8984446.
B. C. Wibowo, I. A. Rozaq, dan T. P. Pratama, “Implementation Of Monitoring and Control Temperature and Humidity Based on IoT in The Oyster Mushroom Cultivation Room,” PROtek J. Ilm. Tek. Elektro, vol. 10, no. 2, hal. 85, 2023, doi: 10.33387/protk.v10i2.4863.
A. Najmurrokhman, Kusnandar, A. Daelami, E. Nurlina, U. Komarudin, dan H. Ridhatama, “Development of Temperature and Humidity Control System in Internet-of-Things based Oyster Mushroom Cultivation,” 2020 3rd Int. Semin. Res. Inf. Technol. Intell. Syst. ISRITI 2020, hal. 551–555, 2020, doi: 10.1109/ISRITI51436.2020.9315426.
D. Tazakka Ma’arij, A. Yudhana, D. T. Ma’arij, dan A. Yudhana, “Temperature and Humidity Monitoring System in Internet of Things-based Solar Dryer Dome,” Bul. Ilm. Sarj. Tek. Elektro, vol. 5, no. 3, hal. 323–335, 2023, doi: 10.12928/biste.v5i3.8633.
I. K. Wardani et al., “The feasibility study: Accuracy and precision of DHT 22 in measuring the temperature and humidity in the greenhouse,” IOP Conf. Ser. Earth Environ. Sci., vol. 1230, no. 1, 2023, doi: 10.1088/1755-1315/1230/1/012146.
F. Hafeez, U. U. Sheikh, A. Khidrani, M. A. Bhayo, S. M. Abdallah Altbawi, dan T. A. Jumani, “Distant temperature and humidity monitoring: Prediction and measurement,” Indones. J. Electr. Eng. Comput. Sci., vol. 24, no. 3, hal. 1405–1413, 2021, doi: 10.11591/ijeecs.v24.i3.pp1405-1413.
F. Hendajani, A. Mughni, I. P. Wardhani, dan A. Hakim, “Modeling Automatic Room Temperature and Humidity Monitoring System with Fan Control on the Internet of Things,” ComTech Comput. Math. Eng. Appl., vol. 13, no. 2, hal. 75–85, 2022, doi: 10.21512/comtech.v13i2.7433.
I. Riadi dan R. Syaefudin, “Monitoring and Control Food Temperature and Humidity using Internet of Things Based-on Microcontroller,” J. Ilm. Tek. Elektro Komput. dan Inform., vol. 7, no. 1, hal. 108, 2021, doi: 10.26555/jiteki.v7i1.20213.
T. H. Nasution, M. A. Muchtar, S. Seniman, dan I. Siregar, “Monitoring temperature and humidity of server room using Lattepanda and ThingSpeak,” J. Phys. Conf. Ser., vol. 1235, no. 1, 2019, doi: 10.1088/1742-6596/1235/1/012068.
M. Alvan Prastoyo Utomo, A. Aziz, Winarno, dan B. Harjito, “Server Room Temperature & Humidity Monitoring Based on Internet of Thing (IoT),” J. Phys. Conf. Ser., vol. 1306, no. 1, 2019, doi: 10.1088/1742-6596/1306/1/012030.
M. T. Seman, M. N. Abdullah, dan M. K. Ishak, “Monitoring temperature, humidity and controlling system in industrial fixed room storage based on IOT,” J. Eng. Sci. Technol., vol. 15, no. 6, hal. 3588–3600, 2020.
Azhari, T. I. Nasution, S. H. Sinaga, dan Sudiati, “Design of Monitoring System Temperature And Humidity Using DHT22 Sensor and NRF24L01 Based on Arduino,” J. Phys. Conf. Ser., vol. 2421, no. 1, 2023, doi: 10.1088/1742-6596/2421/1/012018.
H. Subastiyan, W. Sunanda, dan R. F. Gusa, “A Prototype of Monitoring Temperature and Humidity on Photovoltaic Using ESP8266,” IOP Conf. Ser. Earth Environ. Sci., vol. 520, no. 1, 2020, doi: 10.1088/1755-1315/520/1/012010.
O. V. Medagedara dan M. H. Liyanage, “Development of an IoT-based Real-Time Temperature and Humidity Monitoring System for Factory Electrical Panel Rooms,” Eng. J. Inst. Eng. Sri Lanka, vol. 57, no. 1, hal. 21–30, 2024, doi: 10.4038/engineer.v57i1.7636.
D. Yulizar, S. Soekirno, N. Ananda, M. A. Prabowo, I. F. P. Perdana, dan D. Aofany, Performance Analysis Comparison of DHT11, DHT22 and DS18B20 as Temperature Measurement, vol. 1. Atlantis Press International BV, 2023.
M. H. S. Nascimento, A. L. S. Moreira, M. A. O. Domingues, A. L. Castro, dan D. L. Moura, “Implementing IoT for Development of a Low-Cost Environmental Monitoring System,” Proc. - 2017 Int. Conf. Comput. Sci. Comput. Intell. CSCI 2017, hal. 1360–1364, 2018, doi: 10.1109/CSCI.2017.237.
Article Sidebar
